ENIGMA
THE LIGHTEST, STIFFEST AND MOST DURABLE BOOM IN EXISTENCE. AVAILABLE IN WAVE, FREEMOVE AND RACE PROFILES
The custom carbon manufacture of the Enigma booms has one main objective; to produce the best stiffness to weight ratio. Unique methods have been developed to enhance the manufacture with every boom built individually with the emphasis on technology, not mass production.
ENIGMA Hardware transforms your entire rig; the ultimate combination of lightweight, stiffness, ergonomics and geometry.

WE DIDN’T SET OUT TO MAKE THE LIGHTEST BOOM OR THE MOST EXCLUSIVE BOOM. WE SIMPLY MADE THE BEST BOOM
SIZE (CM) | PROFILE | DIAMETER (MM) | BOOM HEAD | MATERIAL | WEIGHT (KG) |
---|---|---|---|---|---|
I40-I90 | WAVE | 25 | RDM LOCKJAW | 100% PRE-PREG CARBON | 1.88 |
I50-200 | WAVE | 25 | RDM LOCKJAW | 100% PRE-PREG CARBON | 1.97 |
I60-2I0 | FREEMOVE | 26 | SDM LOCKJAW | 100% PRE-PREG CARBON | 2.23 |
I70-220 | FREEMOVE | 27 | SDM LOCKJAW | 100% PRE-PREG CARBON | 2.61 |
I80-230 | RACE | 27 | SDM LOCKJAW | 100% PRE-PREG CARBON | 2.68 |
I90-240 | RACE | 30 | SDM LOCKJAW | 100% PRE-PREG CARBON | 3.49 |
2I0-250 | RACE | 30 | SDM LOCKJAW | 100% PRE-PREG CARBON | 3.52 |
240-290 | RACE | 30 | SDM LOCKJAW | 100% PRE-PREG CARBON | 3.73 |
SIZE | DIAMETER | BOOM HEAD | MATERIAL | WEIGHT (KG) |
---|---|---|---|---|
WAVE I40-I90 | 25mm | RDM LOCKJAW | 100% PRE-PREG CARBON | 1.88 |
WAVE I50-200 | 25mm | RDM LOCKJAW | 100% PRE-PREG CARBON | 1.97 |
ULTIMATE FREERIDE I60-2I0 | 26mm | SDM LOCKJAW | 100% PRE-PREG CARBON | 2.23 |
FREEMOVE I70-220 | 27mm | SDM LOCKJAW | 100% PRE-PREG CARBON | 2.61 |
SLALOM I80-230 | 27mm | SDM LOCKJAW | 100% PRE-PREG CARBON | 2.68 |
RACE I90-240 | 30mm | SDM LOCKJAW | 100% PRE-PREG CARBON | 3.49 |
RACE 2I0-250 | 30mm | SDM LOCKJAW | 100% PRE-PREG CARBON | 3.52 |
RACE 240-290 | 30mm | SDM LOCKJAW | 100% PRE-PREG CARBON | 3.73 |
PRO ADVICE
TECHNOLOGY



OVERSIZED TAIL PIECE
Both front and tail sections are massively oversized to achieve unprecedented levels of stiffness. This allows the grip area to use a smaller diameter than other race booms for more comfort and less rider fatigue.


CUSTOM CARBON MANUFACTURE
Constructed entirely in high-end pre-preg carbon, the EnigmaRace is the new benchmark.


UNI-GRIP
Every boom is gripped using a single, solid piece of EVA


LOCKJAW
Born through frustration with generic parts, we analyzed every functional feature and current issues inherent in many boom front ends. The SEVERNE LOCKJAW addresses these issues with function, reliability, and performance.
OVERSIZED FRONT
UNPRECEDENTED STIFFNESS
UNPRECEDENTED STIFFNESS
CUSTOM CARBON MANUFACTURE
FUNCTION / RELIABILITY
NO ADAPTER TO LOOSE
RIGGING DURABILITY
FAQ
HOW DO I TIGHTEN AND USE THE ROPE ON THE BOOM TAIL END?
The Enigma Wave and Freeride booms work with a loop and go system. On the Enigma Race models it is best to install an adjustable outhaul system, which will need to be ordered separately.
HOW DO I REPLACE THE PLASTIC CLIPS TO CHANGE THE BOOM LENGHT?
To replace them, first, remove them carefully. The clips can be removed using two flat screwdrivers to pry them loose from their enclosure.
Equally, they can be replaced by forcing them carefully onto place in their enclosure.
WHAT SIZE ENIGMA SHOULD I BUY?
This very much depends on which sail sizes you use. ALL Severne sails have a recommended boom suggestion on their respective size chart on our website.
DO I NEED TO BUY AN ADJUSTABLE OUTHAL KIT?
Yes, the adjustable outhaul kit is ordered separately. The best is to contact your closest Severne dealer for this. Use the dealer locator to find your nearest dealer/distributor.
SHOULD THE BOOM JAW ROTATE?
Over time the boom head can loosen a bit due to usage. One way to avoid this as much as possible is to always store the boom without moving the boom head flat. If you do feel it’s getting too loose you can take off the boom head and add 1 or 2 new layers of carbon around the boom itself at the front to make it tighter.
It’s important to note that a loose boom head won’t result in a broken boom over time.
DOES THE DIAMETER GIVEN IN THE SPECS ALSO COVER THE GRIP?
Yes, this includes the grip
WHAT IS THE DIFFERENCE BETWEEN THE OLDER VERSION AND THE NEWEST VERSION?
The latest generation Enigma boom underwent major upgrades that compared to previous models, include;
– smaller diameter grip
– a lighter tail end
– lighter weight.
– more stiffness
WHAT BOOM AND WHICH SIZES WILL COME WITH THE IQFOIL PACKAGE?
The iQFOiL Men and women packages come with the SEVERNE Enigma RACE 210 – 250 iQFOiL edition.
If you wish to use this boom for official iQFOiL racing, then the iQFOiL version of the Enigma race 210-250 must be purchased. This product includes the QR code necessary for equipment registration at official iQFOiL events.
WHERE TO BUY SPARE PARTS?
You can order these parts at your nearest Severne dealer or distributor. Use the dealer locator to find your nearest dealer/distributor
CAN I USE THE RDM MAST WITH THE SDM CUP?
Yes, you do not need any additional shim, just adjust a rope to tighten it enough on the mast.
CAN I USE THE SDM MAST WITH THE RDM CUP?
No
HOW TIGHT SHOULD I ATTACH THE BOOM HEAD?
You should not apply more than 10-15kg of pressure on the end of the lever for it to close. This can be done with two fingers
DOES MY PRODUCT HAVE A WARRANTY?
Yes, there is 1 year warranty. For more information check the warranty page
CAN I USE THE BOOM ON A MAXIMUM SETTINGS?
Yes