ALIEN

Freeride Foil

 

Purely designed as a windsurf foil board, the Alien enables all the variables to work in harmony and move beyond simply balancing on a foil to WINDSURFING on a foil. A functional foil board with refined details that makes foiling both accessible AND desirable.

The Alien development program was initiated when the disappointment of bolting a hydrofoil to a normal windsurf board was realized. By analyzing and gaining a deep understanding of the new variables that foiling introduced, we saw that specific foil-oriented equipment was required to elevate the experience to a true windsurfing sensation; blasting in control and carving turns rather than balanced on top, nervously trimming.

The differences between the Alien and a normal freeride are many; shape, length, rocker, stance, pretty much everything. But this new geometry works in conjunction with the foil and rig to deliver balance, and a new windsurfing world to any competent windsurfer. It opens up more locations to windsurf, and can double or triple your days on the water.

Stable enough for your first flights, the Alien has the considered details to deliver performance so as not to be outgrown.

Available in two constructions;

  1. Custom precision technology – A performance oriented custom construction that prioritises high resolution shape accuracy, responsiveness, high weight consistency, and the use of high end materials.

  2. Moulded technology – A durable construction that makes use of traditional moulding techniques, and a faster lead time to prioritise cost efficiency.

See more

SIZELENGTH(CM)WIDTH(CM)FIN BOXIDEAL SAILSWEIGHT (KG) (+/- 5%)RIDER WEIGHT (KG)TECHNOLOGY
10519065Deep tuttle foil boxFreek 4.0 to 5.6 / FoilGlide 5.0 to 6.07.0<85Custom precision
11520070Deep tuttle foil boxFreek 4.4 to 5.9 / FoilGlide 5.0 to 7.07.3<95Custom precision
12020574Deep tuttle foil boxFreek 4.8 to 6.3 / FoilGlide 5.0 to 7.07.75<105Moulded
12521075Deep tuttle foil boxFreek 4.8 to 6.3 / FoilGlide 5.0 to 7.07.7<110Custom precision
14521080Deep tuttle foil boxFreek 4.8 to 6.3 / FoilGlide 5.0 to 8.08.66<115Moulded
15521585Deep tuttle foil boxFreek 4.8 to 6.3 / FoilGlide 5.0 to 8.08.9<120Custom precision

Weight tolerance; (+/- 5%)

ALIEN TECHNOLOGY

The Severne Alien foil freeride board comes in two different constructions; 

CUSTOM PRECISION TECHNOLOGY

A performance oriented custom construction that prioritises high resolution shape accuracy, responsiveness, high weight consistency, and the use of high end materials.

Alien sizes; 105, 115, 125, 155

MOULDED TECHNOLOGY

A durable construction that makes use of traditional moulding techniques, and a faster lead time to prioritise cost efficiency.

Alien sizes; 120, 145

CUSTOM PRECISION TECHNOLOGYMOLDED TECHNOLOGY
ALIEN SIZES105, 115, 125, 155120, 145
CONSTRUCTION PROCESSCNC Custom Technology (Hand shaped after each lamination)Molded Technology (faster process)
MATERIALSBiax Carbon and Biax Glass technologyGlass and Carbon construction
ORIENTATIONHigh definition and shape accuracyCost efficiency
WEIGHT/STRENGTH RATIOHigher weight consistency (+/- 3.5%)Maximum strength and durability orientated
VALVEGore-Tex Air ventGore-Tex Air vent

FUNCTIONALLY COMPACT

VOLUME
The volume distribution is very important on a foil board as it can be used in much lighter winds than you need to waterstart. So uphauling is an important consideration, and the Alien has enough volume forward to allow traditional uphaul technique with one foot either side of the mast base. A lot of volume in the back half of the board allows you to get into the straps before the board is even moving, and then kick-start up onto the foil.

LENGTH
Shorter length reduces the leverage and lift required by the foil to get the board out of the water and keep it there. So the Alien is much shorter than normal freeride boards, but still has enough length to be able to use the nose area for down-force at high speeds, balancing the lift from the foil. Having some length at the front also softens re-entry, minimizing catastrophic touch-downs.

WIDTH
The width of the board matches the widths of the foils it’s designed for. Too wide and the board has too much leverage over the foil and it’s easy to overpower the foil or not have enough support. Too narrow and the foil can dictate where the board goes. So we balance it up – Alien widths are 65-75cm wide, and designed for similar width foils.

BALANCE

The board is but a single part of the foiling windsurfer, and must work in harmony with other components; the foil and the rig.
The geometry of all 3 components (Foil, Board, Sail) work together to promote an upright stance. This requires only small movements for the rider to trim the ride – less effort and a quicker response to control increasing or decreasing lift.
With everything working together, the balance of flight is effortless.

MAST TRACK
To achieve balance, the mast track is positioned further back to keep the rig standing vertical rather than the traditional raked back position. A vertical rig is more stable, and positions the sails’ CoE directly above the lift of the front wing.

FOOTSTRAPS
The rider’s feet are positioned either side of the front wing, and straps are positioned closer together for a more upright stance. This allows smaller movements to maintain foil trim, and keeps the riders weight directly above the foil lift.

The foiling stance is more rotated outwards towards the rail. Less load on the rig means the twist angles necessitate more rig sheeting, and to feel comfortable in this position the back foot is out near the rail and the front strap angle is reduced.

CONTOURS

BOTTOM GEOMETRY

The bottom shape on the Alien has 2 parts; forward half to manage touch-downs and the back half to accelerate to take-off velocity.

1. From the mast track forward, everything makes touch-downs as gentle and less violent as possible. Big bevels, tucked rails, lots of nose lift. The wide angles on all the edges make it very forgiving when the nose connects with the water from any direction – this prevents the nose catching and tripping, and often simply redirects the nose back into the air.

2. From the mast track back, it’s all about take-off. Sharp rails, flat rocker, parallel outline. The bottom shape is flat for minimal drag, and features large cutouts to enable the tail to be kicked down to angle the board up for acceleration and take-off.

DECK GEOMETRY

The deck contours have been designed to allow the nose area to be used like a sail to create downforce at higher speeds. This effect can be used to balance the increased lift from the foil. By angling the board to windward and presenting the nose area to the wind, the concave deck shape fills with wind and holds the front down.

LIGHT IS RIGHT

When trying to get something to fly, light is right. Any extra weight requires more lift from the foil, so the absolute necessity of each element is carefully evaluated. The Alien is specifically designed for windsurfing and windsurf foils use Tuttle bases, so a single reinforced deep Tuttle box is fitted.

Flying above the chop eliminates most of the impact, so thinner deck pads enable weight savings.
Any learning experience involves a few mistakes, so added nose reinforcements help minimize damage. And new side patches are placed to handle the climbing onto the board when uphauling. With the reduced swing weight of the short board length, these additions are easily balanced out.
Full PVC sandwich with carbon and S-glass skins make this a high performance product.

LIGHT IS FLIGHT

FAQ

WHICH SIZE ALIEN SHOULD I CHOOSE?

Depending on your skills, weight, and wind conditions you aim to windsurf, different board sizes are recommended.
We suggest finding a dealer nearby to get the best advice.

WHAT IS THE RECOMMENDED FOOTSTRAP SETTING?

Inboard position – recommended for foil beginners, additional stability to keep the balance
Outboard position – for more speed, racing feeling, for more advanced windfoilers

WHAT IS THE PANTONE COLOUR CODE FOR THE ALIEN?

The pantone code for the Alien are 85% Fluor Red + 15% Bright Red 805C Grey 11C and Black.

DO I NEED TO REMOVE THE GORE-TEX AIR VENT BEFORE A FLIGHT OR WHILE TRAVELLING?

No! Do not touch or remove the “Goretex” air vent. The vent regulates the internal pressure of the board automatically.

IS IT REQUIRED TO REPLACE THE AIR VENT OVER TIME? HOW DO I REPLACE IT?

We recommend replacing it every 3 years. Find instructions on how to replace it in the product care section.

WHERE CAN I BUY SPARE PARTS FOR MY BOARD? (FOOTSTRAPS, SCREWS, AIR VENT)

You can order these parts at your nearest Severne dealer or distributor. Use the dealer locator to find your nearest dealer/distributor.

WHAT SIZE BOARD BAG DO I NEED?

Please, check our board bag product pages here:

Lite shell
Lite roller

CAN I BUY A NOSE PROTECTOR ONLY?

Unfortunately, it is not possible to buy the protector only. You can order the board with a nose protector when pre-ordering. These are pre-fitted in the factory.

WHERE I CAN BUY SEVERNE BOARDS?

Best is to contact the nearest dealer. Please use our dealer locator to find the closest one.

HOW DO I CHOOSE THE RIGHT BOARD?

Depending on your skills, weight, and wind conditions you aim to windsurf, different board sizes are recommended.
We suggest finding a dealer nearby to get the best advice.
You can also read this article about key important elements before you buy any board.