TRIPLE XTENSION

 

3 PULLEY RDM EXTENSION.

With more people running freeride and slalom sails on RDM masts, the necessity for a 3-pulley RDM extension became obvious.

Design focused on reducing downhaul friction for easier rigging. Careful attention to rope alignment and pulley spacing has enabled significant improvements. Perfectly matched to any sail with the 4-roller tack pulley, the Triple Xtension also suits sails with the 3-roller tack pulley. Other features include Dyneema rope and an integrated hook to anchor the tack strap.

/ ALIGNED TRIPLE PULLEYS
/ STAINLESS STEEL BUTTON AND MECHANISM
/ STAINLESS STEEL AUTOMATIC HINGED COLLAR SYSTEM
/ ZERO CM SETTING

SIZEDIAMETERMATERIALROPEWEIGHT(KG)
HD 24RDMAlloyDyneema0.66
HD 36RDMAlloyDyneema0.75
Carbon 24RDMCarbonDyneema0.46
Carbon 36RDMCarbonDyneema0.53

FAQ

THE PUSH BUTTON DOES NOT COME BACK TO THE ORIGINAL POSITION - WHAT CAN I DO?

Rinse your extension thoroughly with water and make sure there is no sand and dust inside. Then try to press the button several times to help to get back to the correct position

CAN I USE THE EXTENSION ON THE MAXIMUM SETTING?

Yes

CAN I USE THE TRIPLE EXTENSION WITH 3-PULLEY SAILS?

Yes

CAN I USE MY EXTENSION ON "0 CM" SETTINGS?

Yes. To use an extension on a “0” setting simply remove the hinged collar

HOW TO SET THE EXTENSION ON A "2 CM" SETTING?

The 2 cm setting is positioned 90° degrees to the rest of settings just above the mast foot.

HOW TO AVOID THE OXIDATION ON MY ALUMINIUM EXTENSIONS?

Always derig your sail and rinse your extension with fresh water after every session. Do not leave your alu extension inside the mast while you do not use the sail.

WHERE CAN I BUY SPARE PARTS?

You can order these parts at your nearest Severne dealer or distributor. Use the dealer locator to find your nearest dealer/distributor