APEX PRO  /   SPECS    /   SLIPLOK   /   GEOMETRY

APEX PRO

 

The highest performance pro race mast. This is our lightest SDM mast with the fastest reflex response for ultimate performance.
The Apex taper has smaller diameter mid-sections with increased wall thickness for increased reliability.

Alternating texture patterns in the boom area increases friction for less slippage. This eliminates the need to overtighten the boom, decreasing stresses on the mast.

/ ULTIMATE PERFORMANCE
/ INTEGRATED FERRULE
/ TORAY PRE-PREG CARBON
/ +7 MEASURED OFFSET ACCURACY
/ SLIPLOK PREVENTS BOOM FROM SLIDING

MODELSIZEDIAMETERIMCSWEIGHT
APEX PRO400APEX SDM19I.42
APEX PRO430APEX SDM21I.55
APEX PRO460APEX SDM25I.66
APEX PRO490APEX SDM29I.9
APEX PRO530APEX SDM322
APEX PRO550APEX SDM362.I8

Alternating texture patterns in the boom area increases friction for less slippage. This eliminates the need to overtighten the boom, decreasing stresses on the mast.

No more than 10-15kg of pressure needs to be applied on the boom head lever for it to close. 

DO NOT OVERTIGHTEN!
Overtightening the boom head causes damage to your mast.

Alternating texture patterns in the boom area increases friction for less slippage. This eliminates the need to overtighten the boom, decreasing stresses on the mast.

No more than 10-15kg of pressure needs to be applied on the boom head lever for it to close. 

DO NOT OVERTIGHTEN!
Overtightening the boom head causes damage to your mast.