OVERDRIVE _ M2
The OverDrive focuses on maximum reaching speed with increased twist and less back-hand pressure. A lighter weight means improved handling characteristics.
A moderate width sleeve, 7 battens and 3 cams provide draft stability through a huge wind range. Combined with a higher aspect ratio, the OverDrive M2 has impeccable handling characteristics; a lightweight feel, with softer flex.
Smaller sizes (5.5 and down) have 6 battens to increase flex and control for when conditions get extreme. The new OverDrive M2 benefits directly from advances made on the Mach2 development. Increased depth below the boom adds drive and stability whilst the mid and upper leech have been opened more to decrease drag. Flow aligned battens further improve aerodynamics. The resulting performance is explosive acceleration and big numbers on the GPS.
The OverDrive M2 can be run on either RDM masts or SDM masts. The 4.6 is fully set up for RDM with three RDM cams. The sizes 5.0 to 7.8 are setup for SDM. They run one RDM cam (top) and two SDM cams below. The RDM top cam fits and rotates prefect on our Apex shaped masts.
To set up the 5.0 to 7.8 on RDM, simply change the two SDM cams to RDM cams and the sail is fully setup to rig on RDM masts.
KEY DIFFERENCES BETWEEN MACH2 AND OVERDRIVE M2;
33% narrower than Mach 2 for lower weight and less water retention.
Lighter, softer feel
10cm shorter on most sizes for less back-hand pressure.
Compatible with both RDM and SDM masts
UPGRADES FOR 2019
/ FLOW ALIGNED BATTENS
/ REDUCED WEIGHT
/ IMPROVED SPEED AND ACCELERATION