Product InfoOverview NCX THE TEST WINNING NCX INCORPORATES BLISTERING HIGH SPEED, STABILITY, IMMEDIATE RESPONSE AND UNRIVALLED ACCELERATION TOTALLY UNCHARACTERISTIC FOR A NO CAM SAIL. Built on the SEVERNE race sail platform with reduced aspect ratios, a more connected leech and higher skin tension, the NCX delivers accessible race sail performance without cams. The design emphasis is on an extremely balanced sail, with built in shock-absorbing properties, allowing the rider to maintain a comfortable stance through gusts and chop, and provide a huge wind range. Race sail features such as the Stabilizor Panel, dropped clew and shaping to connect the head and leech of the sail define the ultimate performance. The fastest and most fun no cam sail today. The NCX Pro is an upgrade version built on the same NCX platform, allowing freeride customers access to race sail features such as the REFLEX System and eM3 material technology. RACE SAIL PERFORMANCE WITHOUT CAMS MONOFILM CONSTRUCTION STABLE WITH A HUGE WIND RANGE Team Rider Comment BJORN TALKS UP THE NCX “When I am not on the REFLEX 4, I am using the NCX. We transferred a lot of the advances in the race sails directly into the NCX. Stability, acceleration and wind range make this my favourite day off sail” Technology 3&4 ROLLER TACK PULLEY Roller tack pulleys are matched to the sails downhaul requirements and aligned for friction free downhauling and threading ease. Rig your sails with the Severne Hardware Division extensions for function and simplicity. BALANCED BATTEN POCKETS Symmetrically weighted batten pockets are stitched on alternate sides rather than on just one side to keep the sail neutrally balanced. BATTEN ABRASION PROTECTOR With recessed stitching the Batten Abrasion Protector is stitched onto the cross batten to all larger sizes to avoid the wear of the batten pocket on the inside of the boom arm. BOOM HEIGHT REFERENCE Boom height gauge for ease of reference. DROPPED CLEW The Dropped Clew allows for the reduction of boom and luff lengths; reducing the swing weight, increasing stability and promoting manoeuvrability. DUAL CLEW POSITIONS Allows the rider to fine tune the rig to his requirements. The higher eyelet assists the rider in hanging off the rig, which is favoured by freestyle riders and many new school wave riders. The lower eyelet position favours shorter riders and allows you to drive more power through the board. MOLDED SOFT EDGE With recessed grooving, covering any vulnerable stitching the moulded soft edge encloses the hard edge long the foot of the sail and protects the stitching from wear along the board non-skid. MOLDED TACK FAIRING Protects your board from impact and neatly covers the foot detailing. It incorporates the rope stash pocket for easy storage of your downhaul rope. SEAMLESS FOOT CONSTRUCTION A single panel in the foot area with hidden load patches and zero exposed stitching eliminates seam abrasion and seam creep in this high load area. Maximum durability and minimum weight. SEAMLESS HEAD PANEL This high abrasion area is made from only I panel and does not carry any exposed seams, preventing any potential weak point in this area. As a result, seam creep and seam-related failure have been eliminated. SLEEVE POP UP Enables the mast to be inserted into the top of the boom cut-out, without having to leave your comfortable seat at the foot of the sail. STABILIZOR PANEL Designed to hold the 3D shaping of this critical area, the Stabilizor Panel reduces the vertical stretch of the sail over time. It preserves the precise shaping your sail has been designed with and produces a more stable foil shape when the sail is under load. TPR KEVLAR ANTI-ABRASION HEAD PATCH Protects the adjustment webbing and head assembly stitching from wear during rigging, carrying and launching. Specification SIZELUFFBOOMBATTENSWEIGHTHEADRECOMMENDED MASTIMCSCOMPATIBLE MASTIMCS NCX 5.541818273.99ADJ.SEVERNE 40019SEVERNE 43021 NCX 6.043818774.17ADJ.SEVERNE 43021SEVERNE 46025 NCX 6.546318874.24FIXEDSEVERNE 43021SEVERNE 46025 NCX 7.047219474.46FIXEDSEVERNE 46025-- NCX 7.548420274.6FIXEDSEVERNE 46025-- NCX 8.049420874.8FIXEDSEVERNE 46025SEVERNE 49029 NCX 9.051922375.13FIXEDSEVERNE 49029-- Media Images Downloads Rigging Guide Severne No Cam Rigging Guide.pdf
3&4 ROLLER TACK PULLEY Roller tack pulleys are matched to the sails downhaul requirements and aligned for friction free downhauling and threading ease. Rig your sails with the Severne Hardware Division extensions for function and simplicity.
BALANCED BATTEN POCKETS Symmetrically weighted batten pockets are stitched on alternate sides rather than on just one side to keep the sail neutrally balanced.
BATTEN ABRASION PROTECTOR With recessed stitching the Batten Abrasion Protector is stitched onto the cross batten to all larger sizes to avoid the wear of the batten pocket on the inside of the boom arm.
DROPPED CLEW The Dropped Clew allows for the reduction of boom and luff lengths; reducing the swing weight, increasing stability and promoting manoeuvrability.
DUAL CLEW POSITIONS Allows the rider to fine tune the rig to his requirements. The higher eyelet assists the rider in hanging off the rig, which is favoured by freestyle riders and many new school wave riders. The lower eyelet position favours shorter riders and allows you to drive more power through the board.
MOLDED SOFT EDGE With recessed grooving, covering any vulnerable stitching the moulded soft edge encloses the hard edge long the foot of the sail and protects the stitching from wear along the board non-skid.
MOLDED TACK FAIRING Protects your board from impact and neatly covers the foot detailing. It incorporates the rope stash pocket for easy storage of your downhaul rope.
SEAMLESS FOOT CONSTRUCTION A single panel in the foot area with hidden load patches and zero exposed stitching eliminates seam abrasion and seam creep in this high load area. Maximum durability and minimum weight.
SEAMLESS HEAD PANEL This high abrasion area is made from only I panel and does not carry any exposed seams, preventing any potential weak point in this area. As a result, seam creep and seam-related failure have been eliminated.
SLEEVE POP UP Enables the mast to be inserted into the top of the boom cut-out, without having to leave your comfortable seat at the foot of the sail.
STABILIZOR PANEL Designed to hold the 3D shaping of this critical area, the Stabilizor Panel reduces the vertical stretch of the sail over time. It preserves the precise shaping your sail has been designed with and produces a more stable foil shape when the sail is under load.
TPR KEVLAR ANTI-ABRASION HEAD PATCH Protects the adjustment webbing and head assembly stitching from wear during rigging, carrying and launching.
